Clause numbers only; read the requirements in your own copy of the standard. The kit is a way of meeting them in practice, not a substitute for them.
| Topic | AS9100D | In this kit |
|---|---|---|
| Configuration management | 8.1.2 | Configuration register, status accounting, configuration checks |
| Product safety | 8.1.3 | The safety question on every change |
| Changes to requirements for products and services | 8.2.4 | Customer order and specification changes through contract review |
| Design and development changes (where you hold design authority) | 8.3.6 | The same assessment, plus your design review |
| Information for external providers | 8.4.3 | Flow-down of changes; supplier change notice |
| Equipment, tools and software programs | 8.5.1.1 | Program validation and control |
| Production process verification | 8.5.1.3 | FAI after a change (with AS9102) |
| Identification and traceability | 8.5.2 | Effectivity; revision on traveler and certificate |
| Control of changes | 8.5.6 | Engineering and process change assessments, change board |
| Control of documented information | 7.5.3 | Document register, issue log, external documents, records |
Need more than one resource, or not sure where to start? Book a complimentary 30-minute Aegis Quality Guidance Call. We'll find the tools that fit your situation and a sensible place to start. No sales pressure, no obligation.
A management aid, not certification or a registrar audit. Using it does not by itself show conformity to AS9100D or any other standard, and your customers' requirements may add to it.
Clause numbers refer to AS9100D (SAE AS9100 Rev D) unless another document is named. The standards' text is not reproduced here: use your own licensed copy.
Aegis Insights are our own guidance, labeled wherever they appear: how we approach this work, not a requirement of any standard or customer.